|
3:1 High Shrink Ratio, Dual-Wall, Semi-Rigid, Polyolefin Tubing
Send to an Associate
Request More Information
| Specification Values |
Specification
|
Value
|
Test Method
|
Tensile Strength (Unaged):
|
Min. 1.06 kgf/mm˛
|
ASTM D-638
|
Elongation (Unaged):
|
Min. 200%
|
ASTM D-638
|
Tensile Strength (Aged):
|
Min. 75% of the value of unaged specimens
|
158° C/168 hours
|
Elongation (Aged):
|
Min. 100%
|
158° C/168 hours
|
Deformation:
|
Max. 50%
|
125° C/1 hour
|
Heat Shock:
|
No crack
|
135° C/1 hour
|
Cold Bend:
|
No crack
|
- 30° C/1 hour
|
Flexibility:
|
No crack
|
158° C/168 hours
|
Flammability:
|
Pass
|
VW-1
|
Manufacturer
LG Cable
Applications
A semi-rigid, high shrink ratio, flame-retardant heat shrinkable polyolefin tube with a meltable adhesive which flows when heated. It is suitable for a wide range of applications such as encapsulation of cables, splices and components.
Features
Shrink ratio: 67% or more in the radial direction, 10% or less in the axial direction
Continuous operating temperature: -55°C to 125°C
Flammability: UL VW-1, CSA OFT (Jacket only)
Excellent electrical properties
High resistance to chemicals and oils
Standard
MIL-DTL-23053/4 Class 1
Click here for Tolerances
| Product Dimensions | Minimum Shrink Temperature: 120°C |
| SIZE | EXPANDED | RECOVERED |
| Internal Diameter Minimum (D) | Internal Diameter Maximum (d) | Minimum Total Wall Thickness (t) | Minimum Wall Thickness
(Adhesive Wall)
(t) |
| Inch Size | In. | mm | In. | mm | In. | mm | In. | mm |
| 1/4" | 0.2638 | 6.70 | 0.0500 | 1.27 | 0.0551 | 1.40 | 0.0236 | 0.60 |
| 3/8" | 0.3307 | 8.40 | 0.0650 | 1.65 | 0.0709 | 1.80 | 0.0315 | 0.80 |
| 1/2" | 0.4606 | 11.70 | 0.0949 | 2.41 | 0.0787 | 2.00 | 0.0398 | 1.00 |
The information contained in this specification sheet is intended to assist you in designing with this product. It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose or that the results shown on the specification sheet will be achieved by a user for a particular purpose. The user should determine the suitability of the product for each application.
|
