|
2:1 Shrink Ratio, Dual-Wall, Flexible, Polyolefin Tubing
Send to an Associate
Request More Information
| Specification Values |
Specification
|
Value
|
Test Method
|
Tensile Strength (Unaged):
|
Min. 1.1kgf/mm²
|
ASTM D-638 UL 224
|
Elongation (Unaged):
|
Min. 200%
|
ASTM D-638 UL 224
|
Tensile Strength (Aged):
|
Min. 0.8kgf/mm²
|
ASTM D-638 UL 224 175 C/168 hours
|
Elongation (Aged):
|
Min. 100%
|
ASTM D-638 UL 224 175 C/168 hours
|
Density:
|
Max. 1.40g/cm²@23° C
|
ASTM D-792
|
Heat Shock:
|
Pass @ 250° C x 4 hours
|
MIL-I-23053
|
Low Temperature Flexibility:
|
No crack @ -55° C
|
MIL-I-23053
|
Flexibility:
|
No crack
|
158° C/168 hours
|
Dielectric Strength:
|
Min. 2500V
|
UL 224
|
Flammability (VW-1):
|
Pass
|
UL 224
|
Manufacturer
LG Cable
Applications
Designed for general purpose applications such as the insulation and strain relief of electrical connections and terminations, light-duty harnessing, jacketing and bundling. Adhesive lining forms an environmental seal that helps protect against moisture.
Features
Shrink ratio: 50% or more in the radial direction
Operating temperature: -55°C to 125°C
Flammability: UL VW-1 (Jacket only)
Minimum shrink temperature: 90°C
Standard
UL 224 (Reference Standard)
CSA C22.2 (Reference Standard)
MIL-DTL-23053/4 Class 2
Click here for Tolerances
| Product Dimensions | Minimum Shrink Temperature: 90°C |
| SIZE | EXPANDED | RECOVERED | Standard Spool Length |
| Internal Diameter Minimum (D) | Internal Diameter Maximum (d) | Minimum Total Wall Thickness (t) | Minimum Wall Thickness
(Adhesive Wall)
(t) |
| Inch Size | In. | mm | In. | mm | In. | mm | In. | mm | Ft. |
| 1/8" | 0.126 | 3.20 | 0.062 | 1.57 | 0.025 | 0.43 | 0.008 | 0.20 | 4 |
| 3/16" | 0.189 | 4.80 | 0.093 | 2.36 | 0.025 | 0.43 | 0.008 | 0.20 | 4 |
| 1/4" | 0.252 | 6.40 | 0.125 | 3.18 | 0.030 | 0.56 | 0.008 | 0.20 | 4 |
| 3/8" | 0.378 | 9.60 | 0.187 | 4.75 | 0.030 | 0.56 | 0.012 | 0.30 | 4 |
| 1/2" | 0.500 | 12.70 | 0.250 | 6.35 | 0.030 | 0.56 | 0.012 | 0.30 | 4 |
| 3/4" | 0.752 | 19.10 | 0.375 | 9.53 | 0.035 | 0.69 | 0.012 | 0.30 | 4 |
| 1" | 1.000 | 25.40 | 0.500 | 12.70 | 0.040 | 0.76 | 0.012 | 0.30 | 4 |
| 1-1/2" | 1.500 | 38.10 | 0.750 | 19.10 | 0.043 | 0.86 | 0.012 | 0.30 | 4 |
The information contained in this specification sheet is intended to assist you in designing with this product. It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose or that the results shown on the specification sheet will be achieved by a user for a particular purpose. The user should determine the suitability of the product for each application.
|
