Rogers BF-1000 | HST Materials

Home \| Contact Us	Product Search


Your location: Rubber & Gasket Materials > Foam Tape > Silicone Sponge > BF-1000

Rogers BF-1000
Extra Soft Cellular Silicone Sponge

Additional Information

Acrylic/Siicone Adhesive

Choosing the Right Adhesives

Standard Tolerances

Put Up: Custom slit to width or die-cut to specifications. Available with or without PSA.
Colors: White, Gray
Thickness Range: 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4"

Send to an Associate
Request More Information

Specifications		Test Method
Cell Structure:	Open	ASTM D 1056
UL Listed:	Yes	QMFZ2.E83967
UL Rating:	HF-1 & V-0 (Listed)	UL 94
25% Compression Deflection (PSI):	1 - 5	ASTM D-1056
Compression Set @ 70 C (158° F):	< 1%	ASTM D-1056
Compression Set @ 100 C (212° F):	< 5%	ASTM D-1056
Density (Approximate p.c.f.):	12	ASTM D-3574
Tensile Strength (Typical):	35	ASTM D-412
Elongation (Typical):	100	ASTM D-412
Water Absorption by Weight:	3.5%	ASTM D-471
Weather Resistance UV:	No Degradation	SAE J-1960
Weather Resistance Ozone:	0 (No Cracks)	ASTM D-1171
Temperature Range:	-67° to 392° F	SAE J-2236
FDA Approved (21 CFR 177.2600):	NA
Specifications Available FDA Approved:	BMS 1-68 White Color Only

The information contained in this specification sheet is intended to assist you in designing with this product. It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose or that the results shown on the specification sheet will be achieved by a user for a particular purpose. The user should determine the suitability of the product for each application.