Rogers HT-820 | HST Materials

Home \| Contact Us	Product Search


Your location: Rubber & Gasket Materials > Foam Tape > Silicone Sponge > HT-820

Rogers HT-820
Firm Cellular Silicone Sponge

Additional Information

Acrylic/Siicone Adhesive

Choosing the Right Adhesives

Standard Tolerances

Put Up: Custom slit to width or die-cut to specifications. Available with or without PSA.
Colors: Gray
Thickness Range: 1/32", 1/16", 3/32", 1/8", 3/16", 1/4", 3/8", 1/2"

Send to an Associate
Request More Information

Specifications		Test Method
Cell Structure:	Closed	ASTM D 1056
UL Listed:	Yes	JMLU2.MH13898
UL Rating:	HF-1 & V-0 (Listed)	UL 94
25% Compression Deflection (PSI):	12 - 20	ASTM D-1056
Compression Set @ 70 C (158° F):	< 1%	ASTM D-1056
Compression Set @ 100 C (212° F):	< 5%	ASTM D-1056
Density (Approximate p.c.f.):	24	ASTM D-3574
Tensile Strength (Typical):	60 PSI	ASTM D-412
Elongation (Typical):	65	ASTM D-412
Water Absorption by Weight:	0.8%	ASTM D-471
Weather Resistance UV:	No Degradation	SAE J-1960
Weather Resistance Ozone:	0 (No Cracks)	ASTM D-1171
Temperature Range:	-55° C to 200° C	SAE J-2236
FDA Approved (21 CFR 177.2600):	NA
Specifications Available FDA Approved:	AMS-3196 Gray Color Only

The information contained in this specification sheet is intended to assist you in designing with this product. It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose or that the results shown on the specification sheet will be achieved by a user for a particular purpose. The user should determine the suitability of the product for each application.