P-1600 | HST Materials

Home \| Contact Us	Product Search


Your location: Rubber & Gasket Materials > Foam Tape > Polyethylene Foam > P-1600

P-1600
Polyethylene Foam

Additional Information

PB-ASA Acrylic Adhesive

PB-HSR Rubber PSA

Choosing the Right Adhesives

Standard Tolerances

Put Up: Custom slit to width or die-cut to specifications. Available with or without PSA.
Colors: White, Black
Thickness Range: 1/32", 1/16", 1/8", 3/16", 1/4", 3/8" (Custom skived thicknesses available upon request; minimums may apply)

Send to an Associate
Request More Information

Specifications		Test Method
Density (lbs./cu ft.):	2 lbs.
Compressive Strength (psi) 25% Defl.:	4.9 - 6.1	ASTM D-1056
Compressive Strength (psi) 50% Defl.:	12.7 - 15.5	ASTM D-1056
Compressive Strength (psi) 75% Defl.:	38.8 - 47.4	ASTM D-1056
Tensile Strength (psi):	45-55	ASTM D-624
Elongation % to break:	124 - 152	ASTM D-1564
Tear Resistance lb./in.:	10-12	ASTM D-624
Shore Hardness Typical Value AA Scale:	7	ASTM D-2240
Shore Hardness Typical Value 00 Scale:	51	ASTM D-2240
Water Absorption lb/sq ft of cut surface max:	.04	ASTM D-1667

The information contained in this specification sheet is intended to assist you in designing with this product. It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose or that the results shown on the specification sheet will be achieved by a user for a particular purpose. The user should determine the suitability of the product for each application.