A low shrink temperature, highly flame retardant vinyl tubing designed to increase productivity in a variety of applications while protecting sensitive substrates and adjacent components. UL VW-1 and CSA OFT

PROPERTY	TEST METHOD	TYPICAL VALUE
Specific Gravity	ASTM D 792	1.32
Tensile Strength	ASTM D 2671	3,000 psi
Ultimate Elongation	ASTM D 2671	300%
Brittleness Temp.	ASTM D 746	-280 C
Flammability	UL Subject 224 VW-1	Pass
Volume Resistivity	ASTM D 257	21.5 x 10 12
Dielectric Strength	ASTM D 149	1,083 vpm

Shrink Ratio: Full 2:1. Forms a smooth, tight-fitting insulation for most applications with a high degree of flexibility.

Longitudinal Shrinkage:Approximately 15%. Allows ripple-free conformance around sharp bends.

Minimum Recommended Shrink Temperature: Shrinks quickly at 100⁰C (212⁰ F) to provide outstanding dielectric and mechanical protection without damage to enclosed or adjacent omponents.

Chemical Resistance:Resists most chemicals including chlorinated cleaners,grease, penetrating oils.

Specifications: UL Subject 224 VW-1. CSA OFT rated for 600V. ASTM D 3150. MIL-I-23053/2 Class 2.

Standard Colors:Black, white, red, yellow and clear.

Operating Temperature Range: -20⁰ C to 105⁰ C.

Storage:Heat Sensitive. Store at 70⁰F or below, or use within 30 days.

	Expanded I.D. Minumum		Recovered I.D. Maximum		Recovered Wall Nominal		Standard Packaging
Size	in.	mm	in.	mm	in.	mm	in.	mm
3/64	.046	1.17	.023	0.58	.020	0.51	1,000’	2,000’
1/16	.063	1.60	.032	0.82	.020	0.51	1,000’	2,000’
3/32	.093	2.36	.046	1.17	.025	0.64	1,000’	2,000’
1/8	.125	3.18	.063	1.60	.025	0.64	1,000’	2,000’
3/16	.187	4.75	.093	2.36	.025	0.64	1,000’	2,000’
1/4	.250	6.35	.125	3.18	.025	0.64	1,000’	2,000’
5/16	.313	7.94	.157	3.99	.028	0.71	500’	1,000’
3/8	.375	9.53	.187	4.75	.028	0.71	500’	1,000’
1/2	.500	12.70	.250	6.35	.028	0.71	250’	500’
5/8	.625	15.88	.313	7.94	.033	0.84	250’	500’
3/4	.750	19.05	.375	9.53	.033	0.84	250’	500’
1"	1.000	25.40	.500	12.70	.038	0.97	250’	500’
1-1/4	1.250	31.75	.625	15.88	.041	1.04	250’	500’
1-1/2	1.500	38.10	.750	19.05	.043	1.09	100’	200’
2"	2.000	50.80	1.000	25.04	.048	1.22	100’	200’
3"	3.000	76.20	1.500	38.10	.068	1.73	50’	100’
4"	4.000	101.60	2.000	50.80	.073	1.85	50’	100’

* pressurized reels

The above product information and specifications are based upon research and believed to be true but do not constitute a warranty. All products are sold with the understanding that the purchasers will determine the suitability of the materials for their purpose. HST Materials will supply samples for your testing and product evaluation.

Back to Top