|
Adchem Products:
Acrylic Adhesive Coating
|
| Product: |
254M Double Coated Polyester Film |
|
| Primary
Use: |
This product exhibits all the positive results
associated with a high quality general purpose acrylic system.
254M has excellent resistance to oils, plasticizers,
ultraviolet light. 254M also withstands higher temperatures
than rubber based adhesive systems. Also exhibit resistance to
some plasticizers. Adhesion is excellent to a very wide
variety of substrates. |
|
| Description: |
A high tack, moderate dead load acrylic adhesive film
coated on both sides of a high quality polyester
film. |
|
| Liner: |
Standard liner is a 60# silicone treated semi bleach
densified kraft. Also available with 74# bleached polycoated
stay flat liner. Other liners available on special order,
i.e., 12 pt. 80#. |
|
| General
Use: |
For bonding and laminating to a wide variety of cloths,
vinyl, corks, paper, rigid and flexible plastics. For mounting
displays, sign posters, mirrors, nameplates, and decorative
wall products. Especially suited for splicing various types of
paper products. |
|
Product
Features: |
- Excellent peel and shear
- Bonds
well to most papers (splicing)
- Excellent tack
- Die
cuts cleanly
- Bonds
well to most surfaces
|
|
| Notes: |
The use of heat and pressure will help to increase the
initial bond of the product to the substrate. Surfaces to be
bonded to should be clean, dry, and free from grease and oil.
The product should not be laminated to any material that
contains migrating plasticizers. |
|
| Shelf Life: |
Two years when stored under cool, dry
conditions. |
No warranties are made in
this bulletin. All information, recommendations and descriptive
material concerning Adchem products are based upon research which is
believed to be reliable but shall not constitute a warranty.
Accordingly, all Adchem products are sold with the understanding
that purchasers will be solely responsible for determining the
suitability of the materials for any purpose. Data presented are
typical physical properties and are taken from a limited number of
production runs, and they should not be used for specification
purposes.
|
